Ask our experts a question about this model and we'll get back to you as soon as possible!
23 questions answered by our experts.
Sort by:
- < Prev
- 1
- 2
- 3
- Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Patrick
February 23, 2020
What would cause my washing machine not to spin at the end of a wash cycle
For model number WTW5000DW0
Hello and thank you for writing.It certainly sounds like it could be a faulty drive belt PS11747978 and/or possibly a malfunctioning drive hub kit PS6012095 you should check the part(s) for signs of damage or test with a multimeter, and replace the part(s) as needed. We hope this helps. Please contact us anytime if you require further assistance.
6 people found this helpful.
Was this helpful?
Thank you for voting!
Related Parts:
Drive Belt
$19.75
In Stock
Drive Hub Kit
$34.00
In Stock
Robert
May 6, 2024
I can’t find a tub seal in your parts list
For model number WTW5000DW0
Hello Robert, thank you for reaching out. The tub seal you are looking for does not come separately, and it comes as a part of the transmission, part number PS16220911. Glad to be of assistance!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Related Parts:
Gearcase
$267.99
In Stock
Terry
October 7, 2021
The lid won't lock, why ?
For model number WTW5000DW0
Hello Terry, Thank you for the question. If the Lid is not locking, it is normally an indication the Lid Latch Assembly is defective and will need to be replaced. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Related Parts:
Lid Latch Assembly
$47.93
In Stock
Bambi
December 13, 2019
Not spinning out
For model number WTW5000DW0
Hello Bambi,Thank you for your question. Our sources suggest replacing the lid latch assembly under part PS3497627 for your model to fix the washer. We hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Related Parts:
Lid Latch Assembly
$47.93
In Stock
Dewayne
June 25, 2023
Washer works but will not spin out. What would the possible problem be?
For model number WTW5000DW0
Hello Dewayne, thank you for getting in touch. Based on our understanding of the issue, we would recommend replacing the drain pump, part number PS11756530. Before replacing the drain pump, make sure the drain hose is properly attached and they are clear. We hope this solves your problem!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Related Parts:
Water Drain Pump
$101.34
In Stock
- < Prev
- 1
- 2
- 3
- Next >
Defective lid latch - Cabrio Washer
The instructions that came with the part were worthless. Essentially, unplug, put in new part, plug it back in. I spent a considerable amount of time on the internet and finally found a video showing how to open the top. Unlike other models, it is held down by clamps in the back rather than clips in the front. Once finding this inform ... Read more ation the installation was simple. Remove the clamps and the back of the console, slide the top forward and lift, remove and replace the lock and reassemble. You don't even have to remove the hoses.
Read less
Parts Used:
-
William from Wakefield, RI
-
Difficulty Level:
Very Easy
-
Total Repair Time:
15 - 30 mins
-
Tools:
Nutdriver, Screw drivers
93 of 112 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Noise on bottom of Washer louder as time went on. 1 1/2 years
Well, first investigated and found loose nut on drive clutch. First take off the two screws with nut drive then cover off using a screwdriver blade to snap off the cover. Then socket ratchet to take off the nut on drive clutch. take off belt by slowly rotating the drive gear. two screws that hold the electronics to the upper drive clutch ... Read more and put aside, so you can snap off the cover for drive clutch on upper part with screwdriver and off the parts come and install whole unit back as took it apart. Line up the new upper clutch so that is position as was before. (Using parts diagram helps a lot as www. partsselect.com has for you or Maytag.com.) Then put the electronic part board back on and the gear and nut. Make sure it is tight by several attempts to make sure it's snugged up good and then slowly roll belt back on the pulley and motor drive. Put your cover guard back on with two screws and done.
Read less
Parts Used:
-
Jerry from WALLA WALLA, WA
-
Difficulty Level:
Really Easy
-
Total Repair Time:
15 - 30 mins
-
Tools:
Nutdriver, Screw drivers, Socket set
84 of 113 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Hub had warn its grooved teeth off and washer wouldnt agitate
ordered hub and it shipped quickly. I was able to put the hub in place and screw the screws in. you want to tighten them down slowly and go around to each screw tightening a little at a time so you don't break the hub. as you tighten the screws down the hub slides down flush. its impossible to just push the hub on with your hand. Buttoned ... Read more it back up and got caught up on laundry. good day when the washer is fixed.
Read less
Parts Used:
-
Allison from RICHFORD, NY
-
Difficulty Level:
Easy
-
Total Repair Time:
15 - 30 mins
-
Tools:
Screw drivers
44 of 57 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
